Konfigurasi Spanning Tree Protocol
Nama : Wahyu Nur Pradana Kelas : 13.4A.21 NIM : 13190209 Mata Kuliah : Administrasi Jaringan Pertemuan 4 "Konfigurasi Spanning Tree Protocol" S1 Switch>en Switch#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#hos Switch(config)#hostname S1 S1(config)#int vlan 10 S1(config-if)#int vlan 20 S1(config-if)#int vlan 30 S1(config-if)#int vlan 40 S1(config-if)#int vlan 50 S1(config-if)#int vlan 60 S1(config-if)#int vlan 70 S1(config-if)#int vlan 80 S1(config-if)#int vlan 99 S1(config)#int fa0/6 S1(config-if)#switchport mode access S1(config-if)#switchport access vlan 30 % Access VLAN does not exist. Creating vlan 30 S1(config-if)# %LINK-5-CHANGED: Interface Vlan30, changed state to up %LI...